I very passionate about my work.                                  I am hard working and determined towards my work. I have a positive attitude towards my work

Python(良好)  C/C++(熟练)  Matlab(良好)

2018-06至今——公司:PhotonIC Technologies(少于50人)
职位: 电子软件开发(ARM/MCU...)

工作描述：1. Develop firmware for STM32F103 motherboard 
2. Desktop based python GUI (PYQT5)
3. Develop firmware for SFP28 and QSFP28 OPTICAL TRANSCEIVERS
4. Provide Customer technical support and documents
5. Develop GUI on windows with OPENgl

2016-06至2018-06——公司:Shanghai sonner machinery co ltd
职位: 电子软件开发(ARM/MCU...)

工作描述：1. Design and develop loss in weight feeder firmware using imx287 and STM32F7 ARM mcu
2. Develop firmware in Linux kernel and application space for this project 
3. Develop desktop GUI with windows MFC
4. AC/DC Motor control with PID
5. Kalman Filter, Low Pass filter design for noise filtering

2015-01至2016-07——公司:Linkwell telesystems,india
行业:计算机软件
部门:  Research and development
职位: 软件工程师

工作描述：1. POS machine firmware development on Cortex-m3 MCU
2. Interface AS3911 NFC reader with SPI protocol
3. Optimize firmware code for Low Power consumption
4. Modify UART kernel driver to support ISO7816 protocol

2019-01至今——3d sensing
项目描述：1. 3d sensing firmware development and testing 
2. GUI with OpenGL
3. Develop histogram logic for peak detection in SOC
4. SPI,I2C, Ethernet, STM32
1. Develop firmware for stm32 mcu based motherboard 
2. Develop desktop python based GUI

2018-06至2018-12——QSFP28
所属公司：PhotonIC TECHNILOGIES
项目描述：Develop firmware for qsfp28
1. Develop firmware for this module by reading specific documents 

2. Use Stm32 mcu for the system , using c programming language

2016-04至2018-06——LOSS IN WEIGHT FEEDER
所属公司：shanghai sonner machinery co ltd
项目描述：Develop firmware for loss in weight feeder on imx287 ARM MCU with linux operating system
1. Loss-in-weight feeder technology development 
2. ARM CPU development arm9, STM32F7, STM32F4
3. Develop and debug firmware
4. Test application development in linux and windows MFC
5. Linux Boot-loader, application and kernel development 
6. Multi-task programming in Real time operating system with freertos.
7. Loadcell sensor interfacing , filtering data

2015-01至今——contactless pos system
所属公司：Linkwell telesystems,india
项目描述：To develop contactless POS system using ARM CORTEX-m3 MCU
I was in charge to develop software of contactless card reader using AS3911B RFID sensor using cortex -m3 and SAMD4 arm cortex -a5 cpu.

1. RFID contactless card software development 
2. ARM cortex-m3 CPU and ARM cortex-A5 software understanding and development 
3. C and C++ programming and Software development
4. power management in ARM cpu
5. gcc compiler
6. Linux command and application development 
7. Software debugging
8. Test program development

2013-09至2014-09——University of glasgow
软件工程 硕士